FRP / Rider review

FRP GMB100 Review: Red and White 99cc Mini Bike Unboxing and First Start

ufo opens a red-and-white FRP GMB100, shows its frame, brakes, manual, pull bag and LED light, then adds oil and gas and starts the 99cc mini bike.

Red and white FRP GMB100 99cc mini bike in original ufo unboxing footage
The red-and-white GMB100 at the start of my video.

FRP sent me a red-and-white GMB100 99cc mini bike, and I opened the box to see what was inside. I looked over the frame and brakes, found the manual and loose items, added oil and gas, and started the bike. This FRP GMB100 review stays with that unboxing and first-start sequence rather than turning the later ride into a measured test.

The short version

  • The 99cc mini bike arrived mostly assembled in red and white.
  • I showed the disc brakes, sealed headset bearing, steel frame, welds, manual, pull bag and LED light.
  • I added oil and gas, used the kill switch and choke, and said it started on the first try.
  • FRP’s current product page lists 28 mph, up to 30 miles per tank and a 220 lb maximum load.

My review: I was impressed by the red-and-white GMB100's clean look, the included items and how quickly it came together before its first start.

Watch my GMB100 unboxing and first-start clip

A muted excerpt of my original unboxing and first-start preparation. See the FRP GMB100

What did I find in the red-and-white 99cc mini bike box?

The bike was already mostly together when I opened the carton. I pulled out the loose items before taking out the mini bike, including the owner’s manual and a pull bag. I also showed an LED light and said it had the FRP logo.

FRP GMB100 owner manual, pull bag and LED light shown in original ufo unboxing footage
The loose items and LED light I showed during the unboxing.

A first look at the GMB100 frame and brakes

I looked over the bike before starting it. The details I pointed out were the disc brakes, sealed headset bearing, steel frame and the welds. My comments are a first look at the parts visible in the video, not a component certification.

FRP GMB100 99cc mini bike engine and rear disc brake details in original ufo footage
The engine and rear brake area during my first look.

Oil, fuel and the first start

The frame showed a caution to add engine oil, and I said the bike still needed oil and gas. I added those, used the kill switch and choke, pulled the starter and said it started on the first try. Follow the included manual for the correct setup and break-in checks.

FRP GMB100 99cc mini bike first start in original ufo footage
The first-start moment in my video.

FRP GMB100 99cc mini bike specifications

Spec GMB100
Engine 99cc-class four-stroke OHV
Listed maximum speed 28 mph (FRP figure; not measured in my video)
Maximum rider load 220 lb
Range Up to 30 miles per full tank
Fuel tank 1.38 L
Oil capacity 0.35 L
Start and brake Pull start; rear disc brake
Frame Rigid; no suspension
Assembly About 85% pre-assembled
Current price $399.99–$449.99 across current variants

These are current FRP product-page specifications, not measurements from my first-start video.

GMB100 unboxing and first-start questions

What does ufo show in this FRP GMB100 review?

I show the red-and-white GMB100 coming out of its box, point out the disc brakes and steel frame, show the loose items and LED light, add oil and gas, and start it.

What was in the GMB100 box I opened?

I showed the owner’s manual, a pull bag, an LED light and other loose items. The current package contents depend on the GMB100 option selected on the FRP product page.

Which parts did I point out on the 99cc mini bike?

I pointed out the disc brakes, sealed headset bearing, steel frame and welds. Those are observations from my video, not a laboratory inspection or performance test.

How much assembly did the GMB100 need?

Most of the bike was already together in my video. I still had to add the headlight and complete the oil, fuel and pre-ride checks; the included FRP manual is the setup reference.

Did the GMB100 start in my video?

Yes. I used the kill switch and choke, pulled the starter and said it started on the first try. That is my result in this clip, not a guarantee for every start.

Did I measure the GMB100 top speed?

No. I did not show a measured speed run in the unboxing and first-start excerpt. FRP currently lists 28 mph; that is a product-page figure, not my measurement.

What are the current FRP GMB100 specifications?

FRP lists a 99cc-class four-stroke OHV engine, pull start, rear disc brake, rigid frame with no suspension, a 220 lb maximum load and 85% pre-assembly. These are product-page facts, not my measurements.

How far does the GMB100 go on a full tank?

FRP lists up to 30 miles per full 1.38 L tank. Actual range depends on rider weight, terrain, weather, maintenance and riding conditions.

What is the GMB100 return window?

The current product page says eligible return requests must be made within 30 days of delivery. Return conditions and refund treatment depend on the reason, so contact FRP before sending the bike back.

See the GMB100

The GMB100 product page has current colors, packages, specifications and setup information.

Shop the GMB100

Written from videos posted by ufo and edited by FRP Moto. The specifications are FRP’s own.