Your cart is empty
return to shop
I open a red GMB100 99cc mini bike from its shipping box and lay out the pieces I can see: the front-end parts, an LED light, a toolkit bag and the hardware for assembly. This FRP GMB100 review stays with my unboxing and first look, ending with the bike ready for oil and gas.
The short version
- I liked the packaging and the red finish on the 99cc mini bike.
- I showed an LED light, toolkit bag, hardware, front-wheel spacers and a spark-plug tool.
- The front forks and tire were still separate, and the build looked easy to me.
- My finished-bike footage ends before oil and gas; FRP lists the current GMB100 at 28 mph and up to 220 lb.
My review: I liked the red GMB100's packaging, the red color and the clean look of the assembled 99cc mini bike before I added oil and gas.
Watch my GMB100 unboxing and assembly first look
A muted 65-second excerpt from my original unboxing and assembly footage. See the FRP GMB100
What did I find in the red 99cc mini bike box?
I opened the top of the box and immediately saw the seat. The bike was red, the packaging looked good to me, and I pulled out the loose pieces before taking the mini bike out. I showed an LED light, the owner’s manual, a small toolkit bag, hardware and the spacers for the front wheel.

Front forks, tire and the included tools
The front forks and tire were still down in the box. I held up the hardware, the front-wheel spacers and the spark-plug tool, then laid out the pieces for the build. I said the assembly looked easy; the included manual remains the reference for the complete setup.

How did the assembled gas mini bike look?
Once the bike was together, I liked the red color and the way the FRP logo stood out. My close look also shows the compact steel frame and the finished front end. The bike still needed oil and gas in the footage, so I do not present this as a completed riding test.

FRP GMB100 99cc mini bike specifications
| Spec | GMB100 |
|---|---|
| Engine | 99cc-class four-stroke OHV |
| Listed maximum speed | 28 mph (FRP figure; not measured in my video) |
| Maximum rider load | 220 lb |
| Range | Up to 30 miles per full tank |
| Fuel tank | 1.38 L |
| Oil capacity | 0.35 L |
| Start and brake | Pull start; rear disc brake |
| Frame | Rigid; no suspension |
| Assembly | About 85% pre-assembled |
| Current price | $399.99–$449.99 across current variants |
These are current FRP product-page specifications, not measurements from my unboxing.
GMB100 unboxing questions
What do I show in this FRP GMB100 review?
I open the red GMB100 box, show the bike and loose parts, look over the front-end pieces and toolkit, and finish with the bike ready for oil and gas.
What came in the 99cc mini bike box I opened?
I showed an LED light, a toolkit bag, hardware, front-wheel spacers, a spark-plug tool and other assembly pieces. That is what I showed in my box; current package contents depend on the GMB100 option selected.
Did the GMB100 look easy to assemble?
The front-end parts were still separate, and to me the assembly looked easy. I did not present my short video as a complete instruction manual; the included FRP manual is the setup reference.
What did I notice about the red gas mini bike?
I liked the red color and the FRP logo. I also pointed out the disc brakes, sealed headset bearing, steel frame and welds while looking over the bike.
Did I measure the GMB100 top speed?
No. I did not show a measured speed run in this video. FRP currently lists 28 mph for the GMB100; that is a product-page figure, not my measurement.
What are the current FRP GMB100 engine and load specifications?
FRP lists a 99cc-class four-stroke OHV engine and a 220 lb maximum rider load. Those are current product-page specifications, not measurements from my video.
What did the bike still need before riding?
At the end of my assembly footage, the bike still needed oil and gas. Follow the included manual for the correct setup and pre-ride checks.
What GMB100 packages are currently listed?
The current product page lists Bike Only, Starter Kit and Complete Bundle options. The Starter Kit adds an LED light and neck gaiter, while the Complete Bundle also adds goggles and gloves.
What is the GMB100 return window?
The product page says eligible return requests must be made within 30 days of delivery. Return conditions and refund treatment depend on the reason, so contact FRP before sending the bike back.
See the GMB100
The GMB100 product page has current colors, packages, specifications and setup information.
Written from videos posted by minibieksarenotacrime and edited by FRP Moto. The specifications are FRP’s own.
