FRP / Rider review

FRP GMB100 Review: GTA BOY Unboxes a Black 99cc Mini Bike

GTA BOY opens a black FRP GMB100, works through the front-end assembly with a friend, and shares a near-six-foot fit impression.

GTA BOY sitting beside a black FRP GMB100 99cc mini bike during front wheel assembly
Working beside the black GMB100 as its front wheel went on. Still frame from my video.

When I opened the carton, the bike inside was black. That was the color I wanted. My friend and I laid out the separate front-end pieces, opened the bag of fasteners and spent time putting the little FRP GMB100 together outside the garage. This 99cc mini bike review follows that unboxing, the two-person build and my own first fit impression; the embedded footage shows only assembly.

The short version

  • I chose the black GMB100 and liked its black-and-white finish in person.
  • We unpacked the partly assembled bike, separate front wheel and handlebars, instructions and a small hardware pouch.
  • A friend helped with the front end. I found the work fairly simple, but the video is not a substitute for the manual.
  • At close to six feet tall, I sat on the bike and said I had plenty of legroom; no speed was measured.

Watch us fit the black GMB100's front end

Watch a muted assembly excerpt; it contains no riding or measured performance. See the GMB100

What came out of my 99cc mini bike carton?

The black frame and seat were mostly together inside the carton. Beside them I found the separate front wheel and handlebars, a packet of instructions and a tool pouch holding fasteners and wrenches. We took the packaging away and laid out the pieces before starting the front end. The handlebar wrap caught my attention, and I liked the black finish.

Black FRP GMB100 99cc mini bike inside the carton during GTA BOY's unboxing
The partly assembled bike as it came out of the box.

Putting the handlebars and front wheel together

I held the bars while my friend helped line up the front-end pieces. We worked through the clamps and fasteners, then moved on to the front wheel. The camera comes in close on the screws and washers as we set them out beside the bike. I said the install felt simple; that is an impression of our build, not a claim that the bike needs no checks. The GMB100 product page lists the remaining front wheel, fork, fender and handlebar assembly and directs buyers to the manual.

GTA BOY holds a small fastener beside a black FRP GMB100 99cc mini bike front wheel
Sorting the small hardware before finishing the front wheel.

Why I chose the black GMB100

I had seen another color online, but black was the one that suited what I wanted to do with the bike. Once the front end came together, I liked how the black paint and white FRP graphics looked in person. I also opened the rechargeable light included in my particular package; FRP now lists that light with the Starter Kit and Complete Bundle, so it should not be assumed to come with Bike Only.

Can a near-six-foot adult fit this mini bike?

I sat on the GMB100 next to a much larger motorcycle for scale. I said I was close to six feet tall and had plenty of legroom on this compact bike. That is what the fit felt like to me on camera. It is not a promise about every rider's height or weight, and I did not record a measured top-speed test.

FRP GMB100 99cc mini bike specs

Spec GMB100
Engine 99cc-class four-stroke OHV
Maximum rider load 220 lb
Net weight 79.5 lb
Start and brake Pull start, engine stop switch and rear disc brake
Fuel tank 1.38 L
Assembly About 85% pre-assembled; front wheel, fork, fender and handlebars to fit
Current listed price $399.99–$449.99 across current tire and package options

Specifications and current prices come from the FRP product page, not my measurements. The current product page lists 24 mph as the stock maximum; I did not measure speed in my video. The bike is intended for permitted off-road recreation with appropriate protective gear.

Black GMB100 unboxing and fit questions

Which GMB100 color did I choose?

I chose the black GMB100 and liked its black-and-white FRP graphics when I opened the carton.

What did I find inside the box?

I showed the partly assembled bike, front wheel, handlebars, instructions, tool pouch and small hardware. My package also had a rechargeable light; FRP lists that light with the Starter Kit and Complete Bundle, not Bike Only.

Did I put the GMB100 together alone?

No. A friend helped me position the handlebars and front wheel while we worked outside the garage.

How did the assembly feel?

I said the build felt fairly simple, but the video is not an assembly guide. Read the instructions and complete the pre-ride checks.

How did the GMB100 fit me?

At close to six feet tall, I sat on the bike and said I had plenty of legroom. That is my own fit impression, not a universal fit guarantee.

Did I measure this 99cc mini bike's top speed?

No. I did not show a measured top-speed result. FRP's current product page lists a 24 mph stock maximum.

Who is the GMB100 intended for?

FRP describes it for adults and teens, with a 220 lb maximum rider load. Check individual fit and control before riding.

How does the GMB100 ship and what support applies?

FRP lists FedEx Home Delivery and a one-year limited warranty. Its current FAQ lists a 30-day return window for eligible requests; confirm delivery charges and return instructions with FRP.

Can the GMB100 ship to California?

No. FRP's product page says it is not available in California.

Want to look at one?

The GMB100 product page lists current color and package options, the rider-load limit and the remaining assembly steps.

Shop the GMB100

Written from videos posted by GTA BOY (@GTABOY) and edited by FRP Moto.