Your cart is empty
return to shop
I opened a box from FRP, read through the instructions and put the front end of a little black mini bike together in my garage. Then I brought the GMB100 out to my wooded property for its first outing. This FRP GMB100 review is about what I saw in the box, what I assembled and the details that caught my eye; I did not run a measured speed test.
The short version
- I used the instructions to fit the front wheel, fork, handlebars and front fender of my GMB100.
- The directional marking on the tire made me check the wheel orientation as I worked.
- My package had a tool pouch and a rechargeable light. The light depends on the package selected.
- I found the assembly straightforward, then showed the finished bike on my off-road property.
Watch my black 99cc mini bike come together
Watch a muted garage assembly excerpt, not a riding demonstration. See the GMB100
What came in my GMB100 box?
When I opened the carton, I found a mini bike with some front-end assembly still to do. I had the instructions in hand before I started. Later, as I cleared my work area, I also showed the tool pouch and tools. My package included a rechargeable light with several settings; FRP lists a light with the Starter Kit and Complete Bundle, not with every Bike Only configuration.
Putting the front wheel and fork in place
I picked up the front wheel and noticed the tire's directional marking. I checked which way it faced, set the wheel into the front fork with its spacers and continued with the fork on the frame. At each pause I went back to the instructions rather than treating a video as an assembly manual.

Handlebars, fender and first preparations
Once the fork was in place, I centered the handlebars and worked through the clamps and hardware. The front fender was the last separate piece I fitted. The warnings on the bike reminded me that it shipped without engine oil or gasoline, so I prepared both separately before starting it. I found the assembly easy because most of the bike had already arrived together.

My first look outside the garage
I took the assembled bike to my wooded property and showed its compact black frame, chain cover, brake lever, pull starter and engine stop switch. I liked the classic mini-bike look. The wooded setting and my first outing are in the longer source video; the short embedded excerpt above stays with the garage assembly. I did not measure speed or range.
FRP GMB100 99cc mini bike specs
| Spec | GMB100 |
|---|---|
| Engine | 99cc-class four-stroke horizontal OHV |
| Stock maximum speed | 24 mph (FRP figure; not measured here) |
| Maximum rider load | 220 lb |
| Net weight | 79.5 lb |
| Start and brake | Pull start, engine stop switch and rear disc brake |
| Fuel tank | 1.38 L |
| Assembly | About 85% pre-assembled; front wheel, fork, fender and handlebars to fit |
| Current listed price | $399.99–$449.99 across current tire and package options |
Specifications and current prices come from the FRP product page, not my measurements. The current product page lists 24 mph as the stock maximum; I did not measure speed in my video. This mini bike is for permitted off-road recreation with appropriate protective gear.
GMB100 assembly and ownership questions
What did I assemble on the GMB100?
I fitted the front wheel, front fork, handlebars and front fender after opening the box and reading the instructions.
Was the front tire directional?
I noticed the directional marking on my front tire and checked its orientation while fitting the wheel and fork.
What was included with my mini bike?
I showed the instructions and a tool pouch. My package also included a rechargeable light; FRP lists that light with the Starter Kit and Complete Bundle, not Bike Only.
Did my GMB100 arrive with oil and gas?
No. I called out the warning tags and added engine oil and gasoline separately before the first start.
How did the assembly feel?
I found it straightforward. I referred back to the instructions as I fitted the front-end parts.
Is this a measured GMB100 top-speed test?
No. I showed the assembled bike and my first outing, but I did not measure a top speed.
Who is the GMB100 intended for?
FRP describes the GMB100 for adults and teens, with a maximum rider load of 220 lb. Individual fit and safe control depend on the rider.
How does the GMB100 ship and what support applies?
FRP lists FedEx Home Delivery and a one-year limited warranty. Its current FAQ lists a 30-day return window for eligible requests; confirm delivery charges and return instructions with FRP before ordering or returning.
Can the GMB100 ship to California?
No. FRP's product page says this model is not available in California.
Want to look at one?
The GMB100 product page has the current tire and package choices, rider-load figure and assembly details.
Written from videos posted by Fender Bunny (@FenderBunny) and edited by FRP Moto.
