Your cart is empty
return to shop
A new kids dirt bike is exciting, and the first start is the part people rush. In my video I walk through how I started the FRP FX40 for the first time, and the one piece of advice I would repeat to any parent: give a brand-new engine a little time before anyone rides it. This is my FRP FX40 review, built around the first start and the break-in.
The short version
- The FRP FX40 started on the pull once I had oil in it, fuel in the tank and the fuel line primed.
- The instructions say to let a new engine run for a good 15 minutes before anyone rides it.
- I would not get on a brand-new 40cc dirt bike right away. Let it warm up, because there is plenty of time to ride it.
My FRP FX40 first-start video
About three minutes: the first start, the break-in and a first ride. See the FRP FX40
How do you start a new FX40 kids dirt bike?
I start with the key. I put it in and turn it to the on position, then I move the choke all the way down. Before I touch the fuel, I add oil. In my video I use 10W-40, and I would check the manual that comes with your bike for the oil type and amount.
Once the oil is in, I fill the tank all the way with fuel. Then comes the fuel-line bubble. The manufacturer’s instructions say to keep pushing it until you see no more bubbles in the fuel line, so that is what I do. After that I pull the starter, and you can see the fuel coming through before the engine starts.

How long should you break in a 40cc dirt bike?
The instructions say that the first time you start it, you want it to run for a good 15 minutes before use. That gives the motor time to break in and do what it needs to do.
So I would not recommend getting on it right away. Let it start up and warm up a little. It is brand new, and you will have plenty of time to ride it. Take that time, let it warm up, and then you can have some fun with it.
The first ride
After that a rider got on, and the first thing I said was to take it slow. That is my advice for anyone starting out on a kids dirt bike: build up gradually in an open area.
FRP FX40 specs
| Spec | FX40 Ogemaw |
|---|---|
| Engine | 40cc 4-stroke, pull start, no oil mixing |
| Top speed | 20 mph |
| Max rider load | 132 lb |
| Brakes | Front and rear dual disc |
| Suspension | Front and rear |
| Wheels | 10 in, 2.5-10 off-road tires |
| Net weight | 59 lb |
| Fuel tank | 0.26 gal, about 15 miles per tank |
| Price | $279.99 (Basic) to $299.99 (Max), free shipping |
Specs from the FRP product page. The FX40 is for off-road use only, with adult supervision for young riders, and it is not sold in California.
FX40 questions
How do you start the FX40 for the first time?
In my video I turn the key to the on position, put the choke all the way down, add oil first, fill the tank with fuel, push the fuel-line bubble until I see no more bubbles in the line, and then pull the starter. Check the manual that comes with your bike for the oil type and amount.
How long should you break in a new FX40?
The instructions I read say to let it run for a good 15 minutes the first time you start it, which lets the motor break in. I would not get on it right away.
What age and size is the FX40 for?
FRP says the FX40 is built for kids and young teens stepping up from flat ground to real trails. The hard limit is the 132 lb maximum rider load, so use that rather than age alone. Top speed is 20 mph, so the rider should already be comfortable with a throttle and brakes.
How fast is the FX40?
FRP lists a top speed of 20 mph. Start a new rider in an open, flat area and let them build up gradually.
What engine and brakes does the FX40 have?
A 40cc 4-stroke pull-start engine that runs on straight pump gasoline with no oil mixing and no battery to charge. Braking is front and rear dual disc, with full front and rear suspension.
How much assembly does the FX40 need?
FRP says it arrives 85% pre-assembled. Net weight is 59 lb, light enough for one adult to load and to pick up after a tip-over. Range is about 15 miles per 0.26 gal tank.
Is the FX40 a kids dirt bike or a 50cc dirt bike?
It is a 40cc 4-stroke kids dirt bike, not a 50cc. It is built for the same young riders who look at 50cc bikes, with a 132 lb maximum rider load, front and rear suspension and dual disc brakes.
What safety gear does a child need on the FX40?
FRP says a properly fitted motorcycle or off-road helmet is mandatory, plus eye protection, gloves, long sleeves, long pants and over-the-ankle boots, and an adult must supervise young riders at all times.
Where can a child ride the FX40, and is it sold in California?
Only on private property you own or have permission to use, or at a designated off-road riding area or track, never on public roads or sidewalks. The FX40 is for off-road use only and is not available in California.
How much does the FX40 cost, and can I add training wheels?
The FX40 Ogemaw is $279.99 for the Basic and $299.99 for the Max, with free shipping. FRP sells training wheels as an accessory for the FX40.
Want to look at one?
The FX40 product page shows both versions, all the colors and the accessories.
Written from a video posted by darlene carr on YouTube and edited by FRP Moto. The specs are FRP’s own.
