FRP / Rider review

FRP FX125 Review: Unboxing and Assembling a 125cc Dirt Bike From the Crate

I unboxed the FRP FX125: the heaviest box I have ever received, the steel crate, the goodies bag and how the 125cc dirt bike looked once it was assembled.

Rider standing behind the large FRP FX125 shipping box with the FX125 label in a garage
Me and the FX125 box before I opened it. Still frame from my video.

This is the heaviest box I have ever received. I said it out loud before I even opened it, because I could feel it when I went to shift it across the garage floor, and the label on the side said FX125. This is my FRP FX125 review: the unboxing, what was packed with the bike, and how it looked once I had it all put together.

The short version

  • The FRP FX125 arrives in a steel crate inside a big cardboard box, and it was the heaviest box I have ever received.
  • The first thing I noticed was the anodized red caps on the fork.
  • A bag of goodies came with the bike, with goggles, gloves and anti-fog.
  • Once I had it assembled, my verdict on camera was simple: this thing looks insane.

My FRP FX125 unboxing video

About a minute and a half: the crate, the goodies bag, the build and what I changed. See the FX125

What is in the FRP FX125 box? My unboxing

The FX125 comes in a huge cardboard box, and the first time I leaned into it to move it, I knew it was heavy. Cut the cardboard away and the bike is sitting in a steel frame, wrapped up and strapped down, with the black seat, the white bodywork and the FX125 name right there on the side.

FRP FX125 dirt bike wrapped and strapped inside its steel shipping crate
The FX125 inside its steel crate, still wrapped. Still frame from my video.

The red caps on the fork were the first thing that jumped out at me. They are anodized red, and against all that white bodywork they really stand out. The package is sealed really well, too, with the bike wrapped tightly and the wheels protected.

Inside the box there was also a certificate of origin for the vehicle, packed in a clear bag. I held it up on camera and said that if we can make this thing street legal, that would be insane.

Certificate of origin for a vehicle in a clear bag from the FRP FX125 box
The certificate of origin in the bag. Still frame from my video.

The bag of goodies

There was a smaller box with the bike, and I believe the battery is in there. And then there was a bag full of goodies. I opened it up to see what was inside: goggles, gloves and a bottle of anti-fog for the lens. It is a nice touch to have a pair of goggles and gloves ready the first time you ride.

Riding goggles, anti-fog and gloves laid out on cardboard from the FRP FX125 goodies bag
Goggles, gloves and anti-fog from the bag. Still frame from my video.

Putting a 125cc dirt bike together

After that I took the bike out of the crate and assembled it. When I finally had it fully together, I said what I was thinking: this thing looks insane. White bodywork, black graphics, the FRP logo up on the headlight shroud and across the handlebar pad, and a digital dash sitting just behind it.

FRP FX125 front fairing with the FRP logo, handlebar pad and digital dash
The front end of the FX125 once it was assembled. Still frame from my video.

The FX125 is a 125cc air-cooled 4-stroke with a 4-speed manual clutch, and it ships with electric start and a kick-start backup.

Fully assembled white FRP FX125 125cc dirt bike with black graphics standing in a garage
The FX125 fully put together. Still frame from my video.

My assembly mistake: the front brake caliper

I will be honest about the part I got wrong. I think I put the front caliper on backwards. The brake line is supposed to run behind the fork, and mine did not, so I had to take the front wheel off and do it again. It is the kind of thing you only notice once the bike is standing in front of you, and it cost me a few extra minutes.

Front fork, brake caliper and brake hose on the FRP FX125 with the hose running along the fork
The front brake hose and caliper on the FX125. Still frame from my video.

Swapping the headlight bulb to LED

The headlight bulb is replaceable, and my plan is to make it an LED. I had already changed out one of the front headlight bulbs, and I was still waiting on the H4 main one, but even with just that done it already looks a lot better.

FRP FX125 headlight glowing warm white after a bulb swap
The FX125 headlight after the first bulb swap. Still frame from my video.

Should I make it street legal? I asked my viewers

I ended the video with a question: do you think I should make this thing street legal? If so, let me know in the comments below. I am asking because I am curious what you think. FRP sells the FX125 for off-road use only, so the answer depends on your state and local rules, and anything beyond off-road is something you would have to look into yourself.

My first impression of the FX125

From the crate to the finished bike, the FX125 felt like a serious pit bike. It looks bigger and cleaner than I expected, the details are good, and it is a bike I was happy to look at before I had even started it.

FX125 specs

Spec FX125
Engine 125cc air-cooled 4-stroke, 8.7 hp
Transmission 4-speed manual, wet multi-plate clutch
Start Electric and kick
Brakes Hydraulic disc front and rear, dual-piston front caliper
Wheels 17 in front / 14 in rear, or 14 in front / 12 in rear
Seat height 33.9 in (17/14) or 28.1 in (14/12)
Max rider load 265 lb
Top speed About 56 mph (FRP figure)
Price $999.99 (Basic) to $1,099.99 (Pro)

Specs from the FRP product page. The FX125 is for off-road use only, on private property or at a designated off-road area, and it is not sold in California.

FX125 questions

What comes in the FX125 box?

In my unboxing the bike was strapped inside a steel crate, with a smaller box that I believe holds the battery and a bag of goodies with goggles, gloves and anti-fog.

How heavy is the FX125 box?

It was the heaviest box I have ever received, and the bike inside comes strapped in a steel crate. Plan on having help to move it.

How hard is it to assemble the FX125?

FRP ships it mostly built, with the front end, handlebar and wheels left to put on. FRP has setup videos in Service Videos and Tutorials on the site, and the manual covers each step.

How does the FX125 ship?

It ships within 72 hours by LTL freight, curbside, and the carrier calls to schedule an appointment, so give a valid phone number and email. It is not shipped to California, U.S. protectorates, APO/FPO addresses or overseas.

Does the FX125 have electric start?

Yes. FRP lists electric start with a kick-start backup, and a digital dash.

Can the FX125 be made street legal?

FRP sells the FX125 as an off-road bike. In my video I asked my viewers whether I should try to make mine street legal, and I have not done it. Check your state and local rules before you ride anywhere other than private property or a designated off-road area.

Did you have any trouble assembling the FX125?

One thing. I think I put the front brake caliper on backwards, because the brake line is supposed to run behind the fork. I had to take the front wheel off and redo it, so check the line before you tighten everything down.

Can you put an LED headlight bulb in the FX125?

In my video I swapped out one of the front headlight bulbs and planned to replace the H4 main bulb with an LED too. It already looked a lot better. Check bulb type and wattage before you order.

How fast is the FX125?

FRP lists a top speed of about 56 mph. Real speed varies with rider weight, terrain and gearing.

What is the difference between the FX125 17/14 and 14/12?

The 17/14 has a 33.9 in seat for taller riders. The 14/12 has a lower 28.1 in seat. Both share the 125cc engine, the 4-speed manual transmission and the 265 lb maximum rider load.

What is the warranty on the FX125?

FRP lists a 1-year limited warranty.

Can I buy the FX125 in California?

No. The FX125 is for off-road use only and is not sold in California.

Want to look at one?

The FX125 product page shows both wheel-size builds and every spec.

Shop the FX125

Written from a video posted by redsrobbin (@redsrobbin) on TikTok and edited by FRP Moto. The specs are FRP’s own.